3P Menhir Stone

Art. Nr. 9000210

A rustic appearance Rain Tank, in the form of a Menhir Stone. Made of high quality PE, in a granite effect finish.

The lid is asymmetrical, so that you can easily fill a watering can by immersion in the tank.

To connect your 3P Filter Collector to your Menhir Tank please consider use of the 3P Connection Set, Art Number 900123.

Dimensions:
Height 100 cm, and at maximum width 70cm.

3P Wall Tank

Art. Nr. 9000205

A quality rainwater tank, at 650L. Designed to fit close onto the wall. Supplied with metal safety bracket for extra security, and circular saw to cut at 54mm and a 54mm seal.

There are three take off points, 2 at the base at 1inch, and the tap outlet, 30cm above the base, at 3/4 inch

Also available in Green.

Fill with filtered water only, using the 3P Filter Collector, which can be fitted directly to the tank side using the seal supplied.

Dimensions: 80 x 50 x 175 cm.

Tanks can be interlinked using the 3P Connection Set, Art Number 900123. This screws into the bottom 1 inch Connection points (i.e "male" threaded pipe screws into the "female" tanks connector port).

3P Connection Set, 1" unions and 32mm pipe

Art. Nr. 9000123

a 25cm hose with two connection unions at 1", with a hand auger tool included to cut an entry point to your rain tank. This simple auger tool means you can put the inlet to your Menhir Stone wherever you wish to.

The connection set is also ideal for connecting up 2 or more Wall Tanks, simply screw the threaded unions into the recessed 1 inch connection points at the bottom of your 3P Wall Tank.

Any questions, please contact us directly.