Garden Filter

A total retention rainwater filter with integrated dirt collecting basket at mesh width of 1 mm. Easily remove the filter basket with the removal handle.

For installation in a rainwater tank or turret, or before an in-ground tank using the 3P Telescopic Extension Set with lid. This filter is highly suitable for garden watering systems and is ideal where no connection to a sewer is possible, or where water is infiltrated to ground.

All inlets and outlets at DN 100 (110mm OD), one inlet can also be used as an emergency overflow. The cleaned rainwater flows through the bottom connection into the rainwater tank. Also a calmed inlet is recommended.

Connection capacity for roof areas up to 200 m².

The cleaned water can be used for garden watering.

The filter should be cleaned several times during the year, depending on the solid loadings.

1. Rainwater flows onto the filter cartridge.

2. The dirt is retained in the dirt collecting basket. The basket has to be cleaned when necessary.

3. One inlet DN 100 (110 mm OD) can also be used as an emergency overflow.

4. Cleaned water flows over the bottom outlet DN 100 (110mm OD) into the rainwater tank.

5. Use of a calmed inlet is recommended.

Article No. – 1000600
Filter according to DIN 1989-2, Type B
Connection inlet: DN 100 (110mm OD)
Outlet into rainwater tank: DN 100 (110mm OD)
Emergency overflow or additional inlet: DN 100 (110mm OD)

Connection capacity for roof areas up to 200 m².

Housing material: Polyethylene

Material filter basket: Polyethylene Ø 305 x 288 x 245 mm

Mesh size: 1mm

Weight: 2.2 kg