Calpeda GXRM 9SG Submersible Drain Pump 10m Cable and Plug 240V
Calpeda GXRM Pump with 10m Cable and Plug
Submersible drain and dirty water pump in stainless steel. Comes with 10m Cable and 3-pin plug.
The Calpeda GXRM is an open single-impeller submersible drain pump in chrome-nickel stainless steel.
The GXRM 9 has a maximum head of 9m and a maximum flow of around 160 litres per minute. It has a 1.25 inch vertical outlet.
The motor is water cooled by the pumped water passing between the motor jacket and the external jacket.
The GXRM can also be used as a dirty water pump as it can pump water with solids up to 10mm grain size. The suction strainer at the base of the unit bas a double row of holes or extra safety against clogging.
This pump can sit on the bottom of a level tank, however if deposits are expected to form at the bottom of the installation pit, a support must be provided to keep the pump raised.
Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port and with open impeller.
Motor cooled by the pumped water passing between the motor jacket and the external jacket.
Double shaft seal with oil chamber.
Minimum dimension and high levels of performance, for use in many different applications, head up to 12,7 m and flow rates up to 220 liters/min.
– For clean water containing solids up to 10 mm grain size.
– For draining rooms or or emptying tanks.
– Extraction of water from ponds, streams or pits and
for rainwater collection.
– For irrigation purposes.
For outdoor use a power supply cable of not less than 10 m should be used in accordance with: EN 60 335-2-41.
Pumped liquid: Clean water with solids up to 10mm grain size.
Motor: 2-pole induction motor, 50 Hz
Max flow: 160l/min.
Max Head: 9m
Outlet Size: 1.25″ (female threaded outlet)
Dimensions: 176mm deep x 176mm wide x 265mm high
Waterproof protection rating: IPX8 (for continuous immersion)
Motor protection rating: F
Pump Type: Water cooled, single-impeller submersible pump.
Motor Body: Chome-nickel stainless steel (Stainless 304)
Rotor Shaft: Stainless 303.
Impeller: Chome-nickel stainless steel (Stainless 304)
Liquid temperature range: +0°C to +50°C
Maximum immersion depth: 5m (16ft).
Minimum water level: 70mm
Cable Length: 10m (H05RN-F) with plug.
if you need more information, help selecting the best pump for your needs or simply want to buy our products, please Contact Us or call us on 01239 623506.