Connection Sets & Kits
Long Link Kits
The Long Link Kit connects the Filter Collector to the Wall Tank or any other sealed tank where a backnut fitting is not possible. Available in 1 metre, 2 metre, and 5 metre lengths. We also make bespoke kits for trade requirements.
- 1 metre: 9000123L
- 2 metre: 9000123L2
- 5 metre: 9000123L5
Universal Long Link Kits
The Universal Long Link Kit connects the Filter Collector to any thin walled (up to 7 mm) water butt or tank where a backnut can be fitted inside the tank. To fit the backnut, you need to be able to reach inside the tank with one hand.
The Universal Long Link Kit is supplied with a 32 mm hole saw, 3mm thick rubber seal, and backnut. Available in 1 metre, 2 metre, and 5 metre lengths of medium duty PVC hose.
- 1 metre: 9000123U
- 2 metre: 9000123U2
- 5 metre: 9000123U5
¾” Tank-to-Tank Connection Kit
The 3P Tank to Tank Connection Kit connects any two tanks with ¾” BSP female threaded connection points.This is a truly professional solution. Where fitted, all 3P Tanks have female brass threaded connections at 3/4″ BSP.
Ideal for situations where there is some water pressure from standing tanks. The kit comprises a multi layered hose 25 cm long, two hosetails, two 3mm thick rubber washers and two stainless steel hoseclips.
50mm Utility Tank Connection Kit
The Utility Tank Connection Kit will enable the interconnection of two or more 1500 L Utility Tanks. Supplied with 50 cm length of 50 mm hose and two stainless steel hose clips.
The Kit is designed to connect onto the 2″ connection stubs (spigots) at the base of the tanks. Bespoke versions available to order.
Mini Ball Valves
Mini Ball Valves type 405 available in 1″, 3/4″ and in a Pump to Tank Kit.
Connection: female thread x male thread
Surface treatment: chrome plated
Handle material: plastic coated
Handle colour: black
Seal material: PTFE
Size: 1″ or 3/4″
Pressure: 15 bar
- 9000123BV: 1″
- 900123BV: 1″
- 9001123PT: 3/4″
- 9000123PT2: Extra 3/4″ Ball Valve for Pump to Tank Kit
¾” Tap with Hole Cutter
The Tap with Hole Cutter Kit can be used with any thin walled tank and comprises a ¾” High Flow anti-glug tap, as well as a 1″ hole cutter to cut a hole for the tap.
The tap is secured using the backnut provided.
1″ x 32 mm Hosetail with Hole Cutter
Ideal for cutting a hole in any thin walled plastic tank or water butt, the 3P Hosetail with Hole Cutter allows for the connection of a 32 mm hose using the supplied hosetail, rubber sealing ring, and backnut. Clam shell packed, reatil ready with EAN Codes etc.
Water Butt Overflow Elbows
Overflow Elbows can be used as an overflow with any thin walled water butt.
- 1.25″ thread & 38 mm hosetail: 9000331
- 2″ thread & 50 mm hosetail: 9000332
Tank-to-Tank Connector Kits
Used to interconnect any two water butts using 1″ BSP hosetails to the sides of the tanks.
Supplied with a hole cutter, hosetails, rubber seals, backnuts, and a 25 cm hose. Available in ¾” and 1″ diameters. Clam shell packed for retail environments.
- ¾” Connector: 9000326C – 25 mm hose diameter
- 1″ Connector: 9000123 – 32 mm hose diameter
Filter-to-Tank Connector Kits
The Filter-to-Tank Connector Kit is supplied with a hand held cutter and is ideally suited to use with the Filter Collector.
The Kit includes a 25 cm length hose, hole cutter, hosetail, rubber seal, and backnut. Available in ¾” and 1″ diameters.Clam shell packed for retail environments.
- ¾” Connector: 9000125 – 25 mm hose diameter
- 1″ Connector: 9000128 – 32 mm hose diameter