Garden Filter with Telescopic Extension

Garden Filter with Telescopic Extension

 

Description

The 3P Garden Filter with plastic shaft extension tube is for direct installation in the ground before the rainwater tank, with locking lid.

The extension tube is telescopic, so it can be cut to the correct height. It is simple to use and install. The extension is correctly fitted when the bayonet locking system which clicks into place.

This filter is very suitable for equipments of watering the garden and for sites in which the rainwater has to be drained off. (when no connection with a sewer is possible)

All inlets and outlets are at DN 100 (110mm OD), one inlet can also be used as an emergency overflow.

The cleaned rainwater is led through the bottom connection into the rainwater tank. A calmed inlet can be installed there.

Connection capacity for roof areas up to 200 m².

The cleaned water can be used for garden watering.

The filter has to be cleaned depending on the contamination several times during the year.

How it Works

1. Rainwater flows onto the filter cartridge.

2. The dirt is retained in the dirt collecting basket. The basket has to be cleaned if necessary.

3. One inlet DN 100 (110mm OD) can also be used as an emergency overflow.

4. Cleaned water flows over the inlet DN 100 (110mm OD) into the rainwater tank.

Technical Data

Product Code: 1000620

Filter according to DIN 1989-2, Typ B

2 x Connection inlet: DN 100 (110mm OD)
Outlet into rainwater tank: DN 100 (110mm OD)

Connection capacity for roof areas up to 213 m²

Housing material: Polyethylene
Telescopic extension: Polyethylene

Material filter basket: Polyethylene Ø 305 x 288 x 245 mm

Mesh size: 1mm

Weight: 7.3 kg

Accessories

Locking lid for 3P Garden Filter
Art.-No. 1000510

Dimensions

Garden Filter dimensions 2 gf_with_telescopic_extension_dimensions_large